MIL-C-5015 스타일 커넥터

모델	설명	케이블 종류
6	2 socket, MIL-C-5015, IP50 (protection against dust) Amphenol, mates w/ 6M connector Kit Part Number = R6 Solder only (no crimp)	J3, J4, J5A, J6, J9, J9T, J9T2, J9T2A, J10, J51, J61, J81, J93
6D2	2 socket, MIL-C-5015 suitable for Class I Div 2/Zone 2 locations Must be assembled at factory	J9T2A, J9T2AS, J9T2B, J10, J88C
6GD2	3 socket, MIL-C-5015 suitable for Class I Div 2/Zone 2 locations Must be assembled at factory	J9T3A, J12
6GQ/6GQI	3 socket, MIL-C-5015, IP68 (indefinite underwater immersion) high temp 200°C Viton® B boot field-installable Q = electrical contact between shield and transducer housing QI = electrical isolation between shield and transducer housing HTC KIT required for field installation Kit part number = R6GQ	J9T3A
6GSL/6GLSI	3 socket, MIL-C-5015, IP67 (submersible to 1 meter) Viton® B boot field-installable SL = electrical contact between shield and transducer housing SLI = electrical isolation between shield and transducer housing SPKIT required for field installation	J9T3, J9T3A
6GW	Molded, 3 socket, MIL-C-5015, IP67 (submersible to 1 meter) electrical isolation between the shield and transducer housing 1. Must be assembled at factory 2. Standard lengths available. Custom length cable assemblies having the 6GW connector must be purchased in quantities of at least 10 pieces per order and are subject to additional lead-time.	J9T3A
6H/6HI	2 socket, MIL-C-5015 HART-compatible Must be assembled at factory	J3, J9T2A, J9T2AS, J10
6HD2/6HID2	2 socket, MIL-C-5015 HART-compatible Class I Div 2 suitable Must be assembled at factory	J9T2A, J10
6M	2 pin MIL-C-5015, IP50 (protection against dust), Amphenol, mates with 6 connector	J3, J5A, J9T, J9T2, J9T2A, J9T2AS, J10
6Q/6QI	2 socket, MIL-C-5015, IP68 (indefinite underwater immersion) high temp 200°C Viton® B boot field-installable Q = electrical contact between shield and transducer housing QI = electrical isolation between shield and transducer housing HTC KIT required for field installation Kit part number = R6Q	J5A, J9T, J9T2, J9T2A, J9T2AS, J9T2B, J10, J10S, J51, J61, J88, J88C
6QA/6QAI	2 socket, MIL-C-5015, IP68 (indefinite underwater immersion) high temp 200°C Viton® B boot field-installable QA = electrical contact between shield and transducer housing QAI = electrical isolation between shield and transducer housing HTC KIT required for field installation Kit part number = R6QA	J9F
6SL/6SLI	2-socket, MIL-C-5015, IP67 (submersible to 1 meter) Viton® B boot field-installable Cannot be used with the 780A, 784A, 785A, or 788A sensors.	J5A, J9, J9T, J9T2, J9T2A, J9T2AS, J9T2S, J9T3, J9T3A, J9T4, J10, J51, J81
6W	Molded, 2-socket, MIL-C-5015, IP67 (submersible to 1 meter) electrical isolation between the shield and transducer housing 1. Must be assembled at factory 2. Available for 16, 32, and 64 ft cable lengths only except as indicated in Stocked cable assemblies. Custom length cable assemblies having 6W connector must be purchased in quantities of at least 10 pieces per order and are subject to add’l cost and/or lead-time.	J5A, J9F, J9T2, J9T2A, J9T2AS, J9T2B, J9T2S, J10
6WP	Molded, 2-socket, MIL-C-5015, IP65 electrical isolation between shield and transducer housing for use in portable/ walkaround applications Must be assembled at factory	J88, J88C
6WR	Molded, 2-socket, MIL-C-5015, IP67 (submersible to 1 meter) electrical isolation between the shield and transducer housing right angle 1. Must be assembled at factory 2. Available for 16, 32 and 64 ft cable lengths only except as indicated in Stocked cable assemblies. Custom length cable assemblies having the 6WR connector must be purchased in quantities of at least 10 pieces per order, subject to add’l cost and/or lead-time.	J5A, J9F, J9T2A, J9T2B, J10

형상

모델

설명

케이블 종류

CE

6

2 socket, MIL-C-5015, IP50 (protection against dust)
Amphenol, mates w/ 6M connector Kit
Part Number = R6 Solder only (no crimp)

J3, J4, J5A, J6, J9, J9T, J9T2, J9T2A, J10, J51, J61, J81, J93

6D2

2 socket, MIL-C-5015
suitable for Class I Div 2/Zone 2 locations
Must be assembled at factory

J9T2A, J9T2AS, J9T2B, J10, J88C

6GD2

3 socket, MIL-C-5015
suitable for Class I Div 2/Zone 2 locations
Must be assembled at factory

J9T3A, J12

6GQ/6GQI

3 socket, MIL-C-5015, IP68 (indefinite underwater immersion)
high temp 200°C
Viton® B boot
field-installable
Q = electrical contact between shield and transducer housing
QI = electrical isolation between shield and transducer housing
HTC KIT required for field installation Kit part number = R6GQ

J9T3A

6GSL/6GLSI

3 socket, MIL-C-5015, IP67 (submersible to 1 meter)
Viton® B boot
field-installable
SL = electrical contact between shield and transducer housing
SLI = electrical isolation between shield and transducer housing
SPKIT required for field installation

J9T3, J9T3A

6GW

Molded, 3 socket, MIL-C-5015, IP67 (submersible to 1 meter)
electrical isolation between the shield and transducer housing
1. Must be assembled at factory
2. Standard lengths available.
Custom length cable assemblies having the 6GW connector must be purchased in quantities of at least 10 pieces per order and are subject to additional lead-time.

J9T3A

6H/6HI

2 socket, MIL-C-5015
HART-compatible
Must be assembled at factory

J3, J9T2A, J9T2AS, J10

6HD2/6HID2

2 socket, MIL-C-5015
HART-compatible
Class I Div 2 suitable
Must be assembled at factory

J9T2A, J10

6M

2 pin MIL-C-5015, IP50 (protection against dust), Amphenol, mates with 6 connector

J3, J5A, J9T, J9T2, J9T2A, J9T2AS, J10

6Q/6QI

2 socket, MIL-C-5015, IP68 (indefinite underwater immersion)
high temp 200°C
Viton® B boot
field-installable
Q = electrical contact between shield and transducer housing
QI = electrical isolation between shield and transducer housing
HTC KIT required for field installation Kit part number = R6Q

J5A, J9T, J9T2, J9T2A, J9T2AS, J9T2B, J10, J10S, J51, J61, J88, J88C

6QA/6QAI

2 socket, MIL-C-5015, IP68 (indefinite underwater immersion)
high temp 200°C
Viton® B boot
field-installable
QA = electrical contact between shield and transducer housing
QAI = electrical isolation between shield and transducer housing
HTC KIT required for field installation Kit part number = R6QA

J9F

6SL/6SLI

2-socket, MIL-C-5015, IP67 (submersible to 1 meter)
Viton® B boot
field-installable
Cannot be used with the 780A, 784A, 785A, or 788A sensors.

J5A, J9, J9T, J9T2, J9T2A, J9T2AS, J9T2S, J9T3, J9T3A, J9T4, J10, J51, J81

6W

Molded, 2-socket, MIL-C-5015, IP67 (submersible to 1 meter)
electrical isolation between the shield and transducer housing
1. Must be assembled at factory
2. Available for 16, 32, and 64 ft cable lengths only except as indicated in Stocked cable assemblies.
Custom length cable assemblies having 6W connector must be purchased in quantities of at least 10 pieces per order and are subject to add’l cost and/or lead-time.

J5A, J9F, J9T2, J9T2A, J9T2AS, J9T2B, J9T2S, J10

6WP

Molded, 2-socket, MIL-C-5015, IP65
electrical isolation between shield and transducer housing
for use in portable/ walkaround applications Must be assembled at factory

J88, J88C

6WR

Molded, 2-socket, MIL-C-5015, IP67 (submersible to 1 meter)
electrical isolation between the shield and transducer housing
right angle
1. Must be assembled at factory
2. Available for 16, 32 and 64 ft cable lengths only except as indicated in Stocked cable assemblies.
Custom length cable assemblies having the 6WR connector must be purchased in quantities of at least 10 pieces per order, subject to add’l cost and/or lead-time.

J5A, J9F, J9T2A, J9T2B, J10